Home | About Us | Products | Partners | Contact Us
 

8080 PP
FIELD MOUNTED
EXPLOSION PROOF
LOOP POWERED INDICATOR

IME Model 8080PP Loop Powered Digital Indicator allows the process variable from any 4-20mA current source to be monitored.  Since the unit derives its power from the loop, no additional power supply or wiring is needed.  Because of its low voltage drop (5.5 Volts at 20mA), it can be incorporated into almost any 2 wire loop where local indication of a process variable is needed. 

download datasheet

8080 MK
FIELD MOUNTED
EXPLOSION PROOF
LOOP POWERED INDICATOR
LED DISPLAY

IME Model 8080MK Loop Powered Digital Indicators allow the process variable from any 4~20 mA current source to be monitored. Since the unit derives its power from the loop, no additional power supply or wiring is needed. Because of its low voltage drop (3.7 Volts at 20mA), it can be incorporated into almost any 2 wire loop, where local indication of a process variable is needed, because the integral transmitter indicator is inaccessible to view or is at a different location.

download datasheet

8080 MN
FIELD MOUNTED
EXPLOSION PROOF
PROCESS INDICATOR

IME Model 8080 MN Digital Process Indicator allows the process variable from any transmitter to be monitored in the field. Since the unit can provide 24V DC to the transmitter, the unit can be used to power any 2 wire transmitter in the field.

download datasheet

8080 RR
FIELD MOUNTED
LOOP INDICATOR WITH
ALARMS & RETRANSMISSION

IME Model 8080RR Digital Indicator allows the process variable from any transmitter to be monitored in engineering units and 2 corresponding alarms to be assigned.  Both the alarms can be assigned either high or low within the selected range.  8080RR has 4 digit LED display and may be configured to read from -999 to 9999 with 4-20mA input signal.  The decimal point location, engineering units, alarm settings... etc can be adjusted via the membrane keys on the front panel.

download datasheet

8080 PR
TEMPERATURE INDICATOR
WITH DUAL RELAY

IME Model 8080PR allows two independent alarms to be assigned over the temperature range of the sensor. The unit will accept an input from a Pt100 RTD or Type J or K thermocouple and provide an indication on a bright 4 digit LED. The unit serves a dual purpose in addition to local indication of temperature, which is switch selectable to read °C or °F, it also serves as an accurate and repeatable indicating temperature switch.

download datasheet

8080 PR1
TEMPERATURE INDICATOR
WITH DUAL RELAY & RETRANSMISSION
 

IME Model 8080PR1 allows 2 independent alarms to be assigned over the temperature range of the sensor. The unit will accept an input from a Pt100 RTD Sensor and provide an indication on a bright 4 digit LED. The unit serves a dual purpose since in addition to local indication of temperature, which is switch selectable to read Deg F or Deg C, it also serves as an accurate and repeatable temperature switch. In addition a 4-20mA Output proportional to temperature is available, making the 8080PR1 into an indicating transmitter.

download datasheet

8080 PR2
TEMPERATURE INDICATOR
WITH DUAL RELAY &  4 - 20 MA DCPID CONTROL OUTPUT

IME Model 8080PR2 allows 2 independent alarms to be assigned over the temperature range of the sensor. The unit will accept an input from a Pt100 RTD Sensor and provide an indication on a bright 4 digit LED. The unit serves a dual purpose since in addition to local indication of temperature, which is switch selectable to read Deg F or Deg C, it also serves as an accurate and repeatable temperature switch and a PID controller.

download datasheet

8080 PR3
TEMPERATURE INDICATOR WITH DUAL CHANNEL TEMPERATURE SENSOR INPUT

IME Model 8080PR3 allows 2 independent alarms to be assigned over the temperature range of the sensor. The unit will accept an input from two Pt100 RTD Sensor and provide an indication of either channel on a bright 4 digit LED. The unit serves a dual purpose since in addition to local indication of temperature, which is switch selectable to read Deg F or Deg C, it also serves as an accurate and repeatable temperature switch.

download datasheet

8080 FR
FLOW INDICATOR WITH
DUAL RELAY

IME Model 8080FR is a digital Flow Indicator that accepts a 4-20mA signal or pulse from a flow meter and displays the flow rate and the totalized flow. 2 independent alarms can be assigned to either the flow rate or the totalized flow, making the unit ideal for batch control.

download datasheet

Copyright © 2012 Artiv Controls Ltd. All Rights Reserved.